<?xml version="1.0" encoding="utf-8"?>
<catalog>
<media id="1">
	<passage mp3="AUDIO_REPOS/90005.mp3" title="">
		<![CDATA[
			<div id="passage"></div>
		]]>
	</passage>
	<video mode="embed"><![CDATA[]]></video>
	<answerbank words_per_row="5">
		<words audio="tts" file=""><![CDATA[Gently mix the sample to make sure that it is homogeneous.]]></words>
		<words audio="tts" file=""><![CDATA[Hold the syringe by its barrel.]]></words>
		<words audio="tts" file=""><![CDATA[Tap the Syringe button.
The analyzer opens the inlet.]]></words>
		<words audio="tts" file=""><![CDATA[If measurement mode can be selected, select measurement mode.
Note: If you selected the wrong mode, tap the Reselect button and select the correct mode.
Note: If the Other modes button is available, tap it to get access to more modes.]]></words>
		<words audio="tts" file=""><![CDATA[Follow the instructions on the screen.]]></words>
		<words audio="tts" file=""><![CDATA[Place and hold the tip of the syringe in the center of the Inlet Gasket.]]></words>
		<words audio="tts" file=""><![CDATA[Push the syringe into the analyzer as far as it will go and hold it there.]]></words>
		<words audio="tts" file=""><![CDATA[Hold the syringe in the pushed-in position until the analyzer tells you to remove it.]]></words>
		<words audio="tts" file=""><![CDATA[When the analyzer tells you to, remove the syringe.
The analyzer closes the inlet.]]></words>
		<words audio="tts" file=""><![CDATA[10. If necessary, select a different report layout as follows:
a) Tap the current Report layout shown on the screen.
b) Select a new layout from the list.
c) Tap the Select button.]]></words>
		<words audio="tts" file=""><![CDATA[Enter the necessary data in the Patient identification screen.
Note: It is mandatory to enter data in fields with this icon:]]></words>
		<words audio="tts" file=""><![CDATA[If the Patient result screen opens before you have entered the necessary data,
tap the ID button.]]></words>
	</answerbank>
</media>
</catalog>